Storage
Sheds

Basic Information
General Information
Prices and Sizes
Options & Upgrades
Photo Gallery
|
The site location is very important, a minimum of 2' should be
allowed on all sides.
Typically, building permits are not required for one of our wood
storage buildings. Although if any local government requires a permit,
it is the customer's responsibility to obtain it. Our installer's
do not assist in obtaining zoning variances, or do subdivision covenant
searches.
If required, permit and plot plan must be done prior to the start
of building.
If the customer chooses footing and/or slab work, it must be completed
48 hours before the installation date, since our installers do not
to this work nor excavating or clearing. If this is chosen, please
contact info@mrstoragesheds.com
for "Specifications" on setting.
The customer must make arrangements for the site to be level within
6" before the installation date. Painting of the storage building
should be completed within 30 days to assure warranty coverage.
The customer must have an electrical outlet available within 100
feet in order to build the unit. If this is not available, there
will be a generator use charge (see Options & Upgrades).
**FYI** the roof on a storage building is constructed, typically
in one day, using ½" wafer board or CDX plywood (optional)
with #1 grade 20-year, 3-tab shingles. Felt is not required nor
used on our storage buildings, but **IS** available (see Options
& Upgrades).
MR. STORAGE SHEDS will contact the customer within (2) working days
to set a date for installation or site inspection if needed.
No work will be done on legal holidays.
For any additional information regarding installation and/or processing
questions, please contact us: (214) 869-1703 DALLAS, (210) 825-0083
SAN ANTONIO, (512) 748-4003 AUSTIN, (713) 545-6665 HOUSTON Mon-Fri
7am-8pm, Sat. 8am-5pm C.S.T., or via email: info@mrstoragesheds.com
NOTE: Prices do not include
painting, taxes, optional features, permits, zoning and setback
advice and/or compliance, excavation, or leveling beyond 6”.
Some displays show optional features. Roof felt is not required
under most building codes, but is available for an additional cost.
All content subject to change without notice. Products not available
in all areas.
|